6/22/2012
Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication) Review
Average Reviews:
(More customer reviews)I researched competing products from DLink and NetGear online and read numerous reviews. Any of the HD-PLC products should perform similarly in the same situation. Before deciding on a powerline Ethernet product be sure to understand that the quality of your home wiring and the distance the signal must travel all can affect the performance of the product. Poor quality wiring or very long electrical runs may limit performance.
What I liked most about the Panasonic product is that the kit which includes two units is preconfigured, so it works right out of the box without any special configuration. I didn't have to install ANY software to get my network running. I plugged in one unit to my Internet router, and the other unit into a power outlet in a nearby office. Once I connected the Ethernet cable, I was up and running. It was really that easy.
One nice thing with this unit is that you can run a speed test from the unit itself, with the front LED's displaying the estimated network performance. This was handy as I tried different outlet combinations to acheive the best performance. As a side note, I found that plugging the "Master" unit into an outlet as close as possible to the breaker box yeilded the best results. By putting the master as close to the break box as possible (electrica wiring distance) I was able to get a much better signal. I have the master unit in a downtairs room that is about 40' from the breaker box, and the secondary unit in an upstairs office that is about 65' feet from the breaker box.
Note that any powerline Ethernet product is susceptible to interference from other devices. Pay attention to the manual regarding the types of devies that can cause interference, and avoid ever pluggint the device into a surge protector, since that will greatly limit performance.
An additional nice feature of the Panasonic unit compared with DLink and NetGear is that the unit has a power cable. This allows me to plug it into "hidden" outlets, and then place the box in an easy to reach location. Both the NetGear and DLink products are a box that plugs directly into the outlet. This makes them more difficult to access, especially if you want to look at the box to see what it is doing. I like that the Panasonic can sit nicely on the corner of my desk and I can see the lights. I also suspect that the Panasonic will operate cooler since it can be placed in locations where there is air flow all around the unit.
Performance will vary by house and situation. I have a gigabit network switch that connects my machine directly to a server. When I copy a 50 megabyte file to my server using Windows XP, it takes 8 to 9 seconds to copy a 50 megabyte file. Running the same 50 megabyte file copy to a machine on the HD-PLC network connection took about 27 seconds. This seems to be pretty good performance overall. Note that "speed test" is only as good as what is being tested. My test was a real world test under Windows XP copying a 50 megabyte ZIP file.
Click Here to see more reviews about: Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)
Labels:
d-link,
directv,
ethernet,
home network,
htpc,
internet,
networking,
panasonic,
powerline,
powerline hd
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment