Average Reviews:
(More customer reviews)I have a wirelss network w/3 pc's, one Mac Powerbook, w/netgear router, and now the WGPS606 netgear printserver (my motorola WPS870G was half the $$$ and easier to set up on my Powerbook, but got killed by lightning storm yesterday); I have an old laserjet & HP officejet d145. Contrary to rumors, you can get the WPS870G to printserve wirelessly from Mac/OSX through the network (i.e., powerbook is wireless, printserver is also wireless)
1-I set a dedicated IP address in my router to associate w/my printserver...To do this: in 192.168.0.1 (which is the router) I renewed IP addresses, looked into the router's assignment table, and figured out that the printserver was at 192.168.0.4, so I just assigned it to 192.168.0.4; to do the assignment, you also need the device (i.e., the printserver's) MAC address; that's the trick...the MAC address on the netgear printserver is called the "device" or "hardware" MAC address, and it's the number printed on the box itself; if you go to the printserver ip address (in my case, 192.168.0.4), you find netgear's set up pages for the printserver; the printserver has two mac addresses, the 2nd is called something like the `wireless' MACaddress; that wireless MAC address (which is only different by one digit at the end) is what you use when you set up a dedicated IP address for the print server; when you've done all this, you should probably go back into 192.168.0.1 (your router set up pages) try to renew ip addresses to see if the assigned printserver address (in my case, 192.168.0.4) shows up and shows up with the right MAC address
3- when setting up a new printer in printer set up utility, you select IP Printing + LPD/LPR, printer address is your new ip address that you assigned (192.168.0.4 in my case) and queue name is L1 (presumably L2 if you have a second printer)
btw, you may need to upgrade the driver (I needed an HPIJS driver for my multi-function HP d145); the original driver didn't even install from the cd
Click Here to see more reviews about: NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch
With the NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch, users on your network have the freedom to print wirelessly to up to two printers. It also functions as a wireless Ethernet bridge, allowing you to extend your wireless connection and connect up to four users to your wireless network.
Wireless Printing and Bridge The WGPS606 has two USB ports to connect two printers. Simply put your printers wherever works best and plug them into the wireless print server; a Smart Wizard will guide you through configuration in just seconds. Once configured, anyone on the network can print to either printer; business documents can be sent to the high-end laser and photos can be printed on the photo printer. No separate adapters are needed. The print server can print via Peer-to-Peer (PTP) and Windows LPD printing methods.
The print server also functions as a wireless Ethernet bridge, allowing you to connect a cluster of up to four PCs and laptops without dedicated wireless adapters.
Secure and Compatible Powerful 40/64-bit and 128-bit WEP encryption and WPA-PSK keep your wireless network secure. The device is interoperable with 802.11b, 802.11g, and RangeMax (MIMO-G) networks, so you can be sure it will work with your existing wireless network.
The NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch is backed by a 1-year warranty.
What's in the Box WGPS606 54 Mbps Wireless Print Server w/4-port Switch, power adapter, 2 USB cables, resource CD, installation guide, warranty/support information card.
No comments:
Post a Comment