Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch Review

Average Reviews:

(More customer reviews)Due to the increasing size of my home network, I decided toupgrade to the 8 port BEFSR81 from the 4 port BEFSR41. The two areidentical in size. A Cable/DSL router is a MUST HAVE for those whowish to share a broadband connection. 99 percent of DSL providersutilize what is known as Point-to-Point Protocol over Ethernet(PPoE). This works just like a normal dial up connection where youhave a username and a password. Normally, this PPoE is done viasoftware installed on your computer. This has many limitations. First,the host computer must always be on for others to utilze aconnection. In that sense, each computer is not independent of theother.
The Linksys has PPoE software built into it. Each computerplugged into the unit can access the internet independently of eachother. Better yet, you never have to see a username/password screenwhen connecting to the internet.
In addition to allowing one toshare a connection, the Linksys also acts as a hardward firewallpreventing hackers from accessing your computers. A must have! Youcannot be secure enough these days!
The unit is easy enough to useNovice to expert. While they're are many advanced features, it is notimperative to set or configure them. The html based interface of theunit is extremely intuitive and easy to figure out. The unit itselfleaves a very small footprint.
The linksys supports DMZ which isknown as a demilitarized zone. It basically allows one local user tobe exposed to outsiders. It is used for such tasks asvideoconferencing and internet gaming where constant two waycommunication is essential. In addition Quality of Service (QoS) isonly offered on this 8 port model. It allows you to prioritizeinternet tasks such as http, ftp, telnet, etc.... Not really thatimportant unless you have many users on at once.
Many cable modemproviders utilize a system where they "lock" your cablemodem service to either 1 modem, or 1 network card. This is to preventyou from sharing or using your connection with other suchcomputers. They're is a hardware number encoded onto your network cardand modem. This is known as a "MAC" address. To circumventthis, the Linksys cable/DSL router has a box where you enter in theMAC address of the item that the cable modem service is locked to andit will emulate it. Very clever and works very well!.
One thing theLinksys cannot help you with is running cables throughout your houseto different rooms! Right now I have managed to run ethernet cablesthrough 5 different areas of the house. I have networked our homeLaser printer (HP LaserJet 2100TN)and have added a WirelessLAN setupso now with a laptop I can surf via wireless broadband!

Click Here to see more reviews about: Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch

A simple and inexpensive way to share your one IP address over yourentire network, the Linksys EtherFast cable/DSL router connects up to 253 PCs toa high-speed broadband Internet connection or to a Fast Ethernet or Ethernetbackbone. Configurable as a DHCP server or client, the EtherFast cable/DSLrouter acts as the only externally recognized Internet gateway on your localarea network (LAN). The router can be configured via SNMP to filter internalusers' access to the Internet and serve as an Internet firewall againstintruders.
The router features advanced functions such as dynamic and static port routing,DMZ hosting, filtering, forwarding, and quality-of-service capabilities. All ofthese functions can be easily configured through any networked computer's Webbrowser.
The Linksys BEFSR81 router comes with a one-year limited warranty.

Click here for more information about Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch

Read More...

Netgear DS106 6-Port 10/100 Dual Speed Hub with Uplink Button Review

Average Reviews:

(More customer reviews)An earlier review stated "this hub only appears to provide half-duplex support".This is part of the definition of a hub vs a switch, thus the product is not flawed. A switch will provide full duplex and is more appropriate for multiple high bandwidth devices. If you're attempting to decide HUB vs SWITCH, do a google search before you buy.
I have been a fan of Netgear products since they were originally under BayNetworks. They make high quality devices, attractive design, and they normally offer long warranties. This product is no different. I've had it serving up a couple of machines now for over a year without incident. It's remained on 24 hours / 365 days and performs nicely.
The only downside I've seen with Netgear is their on going support (Firmware upgrades, etc.). Obvisouly that won't be an issue with this device, but something to consider if your also looking at them to provide a router solution. Also, the power adaptors seem to go a little too often.
All and all, this is a great hub and wonderful price. I can think of no reason for some who needs a hub to not pick this up.

Click Here to see more reviews about: Netgear DS106 6-Port 10/100 Dual Speed Hub with Uplink Button

The Netgear DS100 series of 10/100 Mbps dual-speed hubs connects multiple PCs to share printers, files, Internet access, and e-mail communications. One can mix and match 10 and 100 Mbps PCs, servers, and peripherals with these hubs, all without any configuration required. The DS100 family combines many capabilities in little space, and the units are designed for price-conscious small-business owners. One can connect 10 or 100 Mbps network devices to the hub. Each port individually senses and adjusts to run at the proper speed.
Each unit has a built-in self-learning bridge that provides the communications link between the 10 and 100 Mbps network devices. The intelligent bridge automatically manages network traffic so that 10 Mbps traffic and 100 Mbps traffic do not crowd each other's segments.

Click here for more information about Netgear DS106 6-Port 10/100 Dual Speed Hub with Uplink Button

Read More...

NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch Review

Average Reviews:

(More customer reviews)I have been using the Netgear FVS318 router firewall for over a month now with not one glitch. For the money, this is an amazing bargain considering it is a true SPI firewall and a certified ipsec VPN endpoint for eight tunnels included with a eight port switch! The quality of Netgear products are also commendable.
We had it up and running in less than fifteen minutes. My son configured two ipsec vpn tunnels with his friends networks using Linksys VPN routers in short order and I have one configured to my Windows 2000 computer at work that is behind a nat router using Windows 2000 built in ipsec capabilities. All three of our ipsec tunnels have proven to be reliable. I also have no problems using remote desktop through port 3389 or going to my pptp Windows 2000 vpn server through port 1723 behind the FVS318.
We have not experienced any of the problems that other reviewers have, but we have experience configuring these kinds of devices. The FVS318 has fairly extensive built in logging though it does not store much information itself but it can be configured to transfer log information to another computer and can even send you an email alert if certain attacks are detected. It has configurable services based on ports and protocols that are used to create port forwarding to inbound services and block outbound services. However you are limited to 16 services. It can control outbound traffic which is very important to defend against undetected trojans or users [and kids] running things like file swapping or other unapproved applications that access the internet. Internet access can be even controlled by a day/time schedule. If your network is fairly simple, a default block all rule could be created [which must be at the end of the list] and then you can specify what outbound services are allowed. It is also possible to deny a computer or address range of computers from having internet access while allowing others full access. Though the block services is a great addition to this device, it is somewhat limited if you have more than a few variations of configurations compared to a more sophisticated [and much more expensive] soho firewall, and the services can not be configured to use certain ip address/subnet destinations for outbound control which should not be a big deal for most home/small office users. However inbound services/port mapping can be configure to come from specific ip address/subnet. That is an important security feature. For instance if you open an internal computer for remote managment, you can configure the FVS318 to accept connections from only one ip address, which will keep everyone else on the internet from trying to connect and guess your password!
I am very impressed with the Netgear FVS318. Being a true SPI firewall and ipsec VPN endpoint with all the other feaures it has in a quality package, I can highly recommend it to anyone that wants a bargain priced internet device that is a big step up from the consumer grade nat routers.

Click Here to see more reviews about: NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch

The NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch offers the small office a space-saving design combining wired connectivity, a NAT router, VPN appliance, SPI firewall, and an eight-port 10/100 Mbps Ethernet switch.
Wired and Wireless Connectivity The FVS318 has a built-in switch, with eight 10/100 Mbps auto-sensing, Auto Uplink ports. With Network Address Translation (NAT) routing, up to 253 users can simultaneously access your connection.
High-class Security For businesses that require more than just a simple NAT router, the FVS318 offers significantly more protection. It provides: a Stateful Packet Inspection (SPI) firewall to prevent Denial of Service attacks, an Intrusion Detection System (IDS), the ability to block Java/URL/ActiveX based on extension, and FTP/SMTP/RPC program filtering.
The FVS318 has eight dedicated VPN tunnels to protect links between remote locations, encrypting the data between them. IPSec-based encryption up to 256 bit is also supported. This lets you easily create secure connections to branch offices or mobile workforces.
Easy Setup Even with all the functionality the FVS318 provides, NETGEAR makes setup a breeze with the intuitive Smart Wizard that connects you to your ISP quickly. The web-based configuration screen is easy-to-use and requires no additional software. DHCP and PPPoE support makes widespread deployment simple.
The NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch is backed by a 3-year warranty.
What's in the Box FVS318 ProSafe VPN Firewall, power adapter, category 5 ethernet cable, installation guide, resource CD, warranty/support information card.

Click here for more information about NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch

Read More...

NETGEAR FS608 8-Port Fast Ethernet Switch Review

Average Reviews:

(More customer reviews)As others say, the device is small and easy on the eyes. I express caution with regard to critical purposes such as servers and IP telephony; we have experienced some weird problems with this. We have three (Netgear FS608 v2) in two locations; two connected to a 24 port Dell switch and the third I think connects to a Cisco 3524. They may intermittently refuse to forward frames from just one source to just one destination while allowing frames from that same source to other destination, weird stuff like that. Reset takes a power cycle OR just unplug the uplink cable and reconnect. It's a real nuisance if it means you have to drive to work on a weekend or an IP telephone call goes "blip" into la-la land. I'm sure they have a limitation on the size of the MAC address cache but I have not so far researched it. Beware using little switches on big networks! (That sounds like a grade b movie title!)

Click Here to see more reviews about: NETGEAR FS608 8-Port Fast Ethernet Switch

The NETGEAR FS608 8-Port Fast Ethernet Switch connects up to eight network devices at 10 or 100 Mbps over Ethernet cables.
Sturdy and Reliable Design NETGEAR's FS600 series switches are designed for use in a home and small office, housed in a compact white case that blends into your home decor. A fanless design keeps operation both silent and more reliable, and ports are located in the rear to reduce cable clutter. Each port has status LEDs for link and activity. The switch can be placed on a flat surface or vertically on the included stand.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto negotiation, which automatically obtains the fastest possible connection, and Auto Uplink adjusts for the different types of Ethernet cables. There is no need for toggle switches or special crossover cables. If your network has existing 10BASE-T devices, they will work seamlessly within a higher bandwidth environment with each port achieving its full speed.
All ports deliver 100 Mbps speed. The FS608 has a 64 KB queue buffer, an address database size of 1,024 MAC addresses, and up to a 148,800 frames/sec max non-blocking, wire-speed frame forward rate for a 100M port (14,800 frames/sec max for 10M port). The switch uses store-and-forward forwarding.
The NETGEAR FS608 is backed by a 3-year warranty.
What's in the Box FS608 8-port Fast Ethernet Switch, AC power adapter, vertical stand, installation guide, warranty/support information card.

Get 33% OFF

Click here for more information about NETGEAR FS608 8-Port Fast Ethernet Switch

Read More...

4 foot Category 5e Cat5e Ethernet Network Patch Cable Cord for Internet Router Switch Hub and Gaming - GRAY - Gold Plated Male to Male RJ45 Connectors for Base-T Networks - Works best for your desktop laptop router modem switch hub DSL Xbox PS2 or PS3 Review

Average Reviews:

(More customer reviews)the cable works fine, but looks like it was made by hand. there are no cable protectors at the ends, just the clears. the picture is accurate.


Click Here to see more reviews about: 4 foot Category 5e Cat5e Ethernet Network Patch Cable Cord for Internet Router Switch Hub and Gaming - GRAY - Gold Plated Male to Male RJ45 Connectors for Base-T Networks - Works best for your desktop laptop router modem switch hub DSL Xbox PS2 or PS3

Get 90% OFF

Click here for more information about 4 foot Category 5e Cat5e Ethernet Network Patch Cable Cord for Internet Router Switch Hub and Gaming - GRAY - Gold Plated Male to Male RJ45 Connectors for Base-T Networks - Works best for your desktop laptop router modem switch hub DSL Xbox PS2 or PS3

Read More...

Electroline EDA-FT08300 8-Port TV Signal Booster/Amplifier with Active Return Path (Retail Package with 5-Year Warranty) Review

Average Reviews:

(More customer reviews)NOTE: ELECTROLINE RECENTLY DISCONTINUED THE Electroline EDA FT08100 8-port TV Signal Booster/Amplifier with Active Return Path AND REPLACED IT WITH THE Electroline EDA-FT08300 8-Port TV Signal Booster/Amplifier with Active Return Path (Retail Package with 10-Year Warranty), AN UPDATED MODEL.
The Electroline EDA-FT08300 is the NEW workhorse of the Electroline product line. It provides bulletproof performance and reliability with GUARANTEED compatibility to all cable services.
How does it work? The EDA-FT08300 incorporates two high quality amplifiers inside one package. One amplifier boosts the forward path (for TV reception and modem downloads) while the other amplifier boosts the Return Path (used for interactive services and modem uploads). By having both high quality amps in one package it becomes the perfect solution to problems with cable modems and TV reception inside your home. It is the only product on the market that can handle the full power required to support cable modems, and it's design (inherited from the EDA-FT08100) has a proven track record of over FIVE years of favorable operation and reviews.
This is not so much of a review as some guidance to understanding whether or not this product is for you. CableTVamps has sold the EDA-FT08100 product since it was first introduced by Electroline back in 2005. We are Electroline's longest running retailer, so we have a lot of experience with the use of Active Return amplifiers.
First, if you are using a Satellite system - just walk on by. None of Electroline's products are for use with satellite TV, and you should not expect it to work when hooked up to your satellite system. The product will get damaged if connected to satellite, and will block the satellite signal.
Second, if you have an ANTENNA and are looking for an HD amplifier, this is not a good choice. The FT08300 should only be used for Cable TV. There are lower cost options for pure HD amplification like the Electroline EDA-2800 Eight Port Cable TV HDTV Signal Booster/Amplifier (Retail Package) or Electroline EDA-2400 Four Port Cable TV HDTV Signal Booster/Amplifier (Retail Package). In addition an Active Return amplifier should never be used with an antenna.
Third, Active Return is generally only needed when you get up past 4 connections. When you have fewer connections, the Return Path Insertion Loss (which is your cable modem's enemy) is generally not a problem. Cable converter boxes and TVs are not as sensitive to return path problems, so in general you can get by with a less expensive product unless you already have problems with your interactive services (pay per view, On Demand). When you have a cable modem and a bunch of other connections, The FT08300 provides a guaranteed way of resolving TV picture problems and keeping your cable modem happy.
We always suggest to our customers to do a little homework and see if they need The EDA-FT08300. The way to find out if you need EDA-FT08300 active return is to get your cable modem's signal levels. We can't share any links in our review, but if you Google CABLETVAMPS CABLE MODEM you can find our User Forum page with detailed instructions on finding out the health of your cable modem. If your cable modem signal levels are healthy without this amplifier installed, you will probably not notice any major improvement in internet speeds or reliability.
The FT08300 is safe to use with all of your cable services - you just take out your splitters, hook up everything to the amp, plug it in, and enjoy faster Internet and a better TV picture.
Lastly you need to keep things in perspective. If the picture or cable modem problems are caused by cabling issues inside your home, an amplifier might not help. In order to achieve the best results the amplifier must be installed as close as possible to where the cable comes into the house - before splitters and cabling have a chance to degrade it. We have generally found that amplifiers help in most situations - but if your purchase does not help resolve your problems we can help you - just email us.

Click Here to see more reviews about: Electroline EDA-FT08300 8-Port TV Signal Booster/Amplifier with Active Return Path (Retail Package with 5-Year Warranty)

Get 27% OFF

Click here for more information about Electroline EDA-FT08300 8-Port TV Signal Booster/Amplifier with Active Return Path (Retail Package with 5-Year Warranty)

Read More...

NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch Review

Average Reviews:

(More customer reviews)This switch is exactly what I expected it to be: solid. Just like the other Netgear equipment I've used, the GS108 is completely hassle-free. My whole house was literally wired for gigabit Ethernet in no more time than it took to plug in the cables. I took it out of the box, plugged in the power cord, and plugged in connections (including a router and the patch cables to the rooms in my home), and went about my networking. It's completely idiot-proof, since all 8 ports automatically detect connection speed and uplink/downlink (meaning that no special cables are needed to hook up additional switches or routers). Plus, the indicator lights show which ports are in use, and at what speeds (10Mb, 100Mb, or 1Gb).
The form factor is great, too: At about 9 inches wide by 4 inches deep by 1 inch thick, it's small enough that I was easily able to place it inside the structured wiring panel, and so light that a little heavy velcro holds it fast. Plus, it doesn't put out a lot of heat; even with the door to the panel closed, it feels warm but never hot to the touch.

Click Here to see more reviews about: NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch

The NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch provides your local area network (LAN) with reliable 10/100/1000 Mbps auto-sensing connectivity for eight users.
Sturdy and Reliable Design NETGEAR's GS100 series desktop switches are housed in a compact sturdy metal case designed without the need for internal fans, keeping operation both silent and more reliable. It can be placed on a flat surface or you can use the included wall mount kit to hide it away on the wall.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto-sensing ports which automatically obtains the fastest possible connection. There are no toggle switches or special crossover cables. The switch will honor priority tags at both the Layer 2 and Layer 3 level if you have your network set to support jumbo frames.
Every port supports up to 2000 Mbps in dedicated bandwidth. Automatic flow control ensures smooth traffic. There is a queue buffer memory of 12 kbytes per port and a MAC address database size of 4,000. The switch has status LEDs for power, and link, speed, and activity for each port.
The NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch has a Mean Time Between Failure of 91,500 hours and is backed by a lifetime warranty. The power adapter is backed by a 2-year warranty.
What's in the Box GS108 Desktop Switch, wall-mount kit, power adapter, installation guide, warranty/support information card.

Get 29% OFF

Click here for more information about NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch

Read More...