Average Reviews:
(More customer reviews)Setup: fairly straightforward. There is a "wizard" setup for those who don't like to go through every single option screen. The screen navigation is laid out in a simple, but not intuitive manner - it takes a few moments to realize the buttons on the left change with tab options at the top, but the buttons on the left don't change if there are multiple screens on the right (like "next page" or a button to press). There is no "go back a page" - they expect you to hit the button to the right that is still visible. All my complaining about that aside - it's as easy, if not easier, to navigate and find settings than both netgear and linksys.
Print server: no setup available on the router - it either is or is not plugged in. Software setup for PC works fine. Did not try it with linux yet.
Wireless: finally, something that works with 64/128 bit WEP. Netgear never worked. Linksys was so-so. This works. NOTE: For those who want to limit ACCESS to the WIRELESS by MAC ADDRESS - this unit cannot do it. It can limit by MAC to the INTERNET, but that will also limit who can attach to the unit, both with wireless and with a physical connection. Most other units only use this filter to limit access to the wireless portion. If used, you have to put in all the machines connecting to it - both wireless and physical....
Firewall: Syslog, email logs available. Nice. SPI works. DMZ support. Passthrough ports available. Works great with my nortel VPN client (this is always a good test of PPTP and so on).
FIRMWARE NOTE: I had the hardest time getting this thing to work with windows terminal services. No matter what setting I used, it would lock up then drop the connection until I rebooted the router (software reboot). Some settings would go longer, but I could get it to lock up within 2 minutes. Nothing seemed to fix it - a few people have reported this on the internet, but since most people aren't using the terminal services part of windows on a regular basis - they would never know it.
The fix was to load the 1.22 firmware, not the 1.23 that came with it. This REMOVES the 802.1X authentication tab (some type of shared radius key BS - if you want radius support, get a REAL wireless device) and it removes the 4X mode for the B+ series of wireless adapters (which I do not have anyway).
TO LOAD FIRMWARE: you would need to run either executable (one for MAC or the other for PC) OR use the web browser to upload the file (requires either java or activeX - not sure) because it opens up the "open file" dialog box - meaning - experimental browsers, like those in my beloved linux box - don't work well with this. ALSO - it states in no unclear terms DO NOT UPGRADE USING A WIRELESS LINK. Use a hard wired computer. I went from 1.23 to 1.22 and back and forth and so on testing this remote desktop issue.
FINAL FIX: load 1.23, hit the button to reset the router to the defaults, load 1.22, reboot, hit the button to reset the router to the defaults, then type all your configuration back in.
Why the crazy steps? If you loaded 1.23, typed ANYTHING in the boxes that aren't available in 1.22 - it remembers and will cause problems, even though that option isn't availble in 1.22 (I tried this - several times for fun). 1.23 -> load setup defaults -> load 1.22 -> load setup defaults -> configure.
Live without their crippled version of RADIUS (if you don't know what this is you don't need it) and who cares about the crappy 4X mode for the B+ stuff? Another marketing ploy anyway.
Bottom line - with some experimentation, I figured out the firmware thing. IT has worked BETTER than the linksys ever did (can we say firmware of the week?) and improved over the netgears I have used (you can print and not be disconnected from the internet - thanks a lot netgear).
4 stars because firmware is supposed to fix stuff, and their two listed updates should not have affected the RDP stuff in 2000/XP. But it did.
Click Here to see more reviews about: D-Link DI-714P+ Wireless Cable/DSL Router, 4-Port Switch, Prnt Server, 802.11b, 22Mbps
D-LINK DI-714P+ - The AirPlus Enhanced 2.4GHz Wireless Router combines next generation 802.11b Digital Signal Processing ( DSP ) technology from Texas Instruments with D-Link's own robust firewall security features, for simple installation and comprehensive management settings.Fully compatible with the IEEE 802.11b standard, and interoperable with all existing 802.11b compliant devicesSupports 64/128/256-bit WEP encryptionBuilt-In Print Server -Includes Parallel port to connect a printer, along with Windows based print server software applicationDimensions -1.3H x 6.5W x 9.25L; weighs about 2 poundsThree year limited warranty
Get 50% OFF
No comments:
Post a Comment