Showing posts with label ethernet bridge. Show all posts
Showing posts with label ethernet bridge. Show all posts

10/04/2012

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP ) Review

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )
Average Reviews:

(More customer reviews)
The WLI-TX4-G54HP is not perfect, but it is one of the best bridges out there. Unlike most bridges from Netgear, Linksys, and D-Link, the Buffalo Technology WLI-TX4-G54HP has 4 Ethernet ports built in, eliminating the need for a separate switch. This is key, since the advantage of a bridge versus wireless adapters is that one bridge can be used for multiple devices (e.g. in an entertainment center to support a TiVo, Wii, Xbox, Xbox 360, PS3, Slingbox, etc). The costly and time consuming alternative is to buy and configure a separate wireless adapter per device, one of which costs as much as the WLI-TX4-G54HP, and many of which don't even support the latest network security encryption.
Compared to other network equipment, setup was relatively straightforward. If you have a Buffalo router or access point, you can use one touch AOSS setup, which worked seamlessly, defaulting to the highest level of encryption supported by all devices (e.g. WPA-AES/CCMP). However, your AOSS settings on your Buffalo router default to supporting 125 High Speed if supported by all devices on your network which can cause issues on the WLI-TX4-G54HP (see below). Also, using AOSS to configure the converter disables any custom settings on your router such as disabling SSID broadcast (a highly recommended security practice), so you'll probably opt to configure your converter manually.
With Manual configuration you have the option of using the PC configuration software or the built-in web-based configuration tool. The only hitch with using the web-based configuration tool is that you have set your computer's wired Ethernet adapter IP address manually to 1.1.1.2 since the converter's IP address defaults to 1.1.1.1 and you have to be on the same subnet to connect to it since there is no built-in DHCP server (to do this, Right-click Network Places, click Properties, right-click your Local Area Connection, click Properties, click TCP/IP, click Properties, select Use the following IP address, and enter IP address 1.1.1.2 and subnet mask 255.255.255.0). Once you change your computer's IP, you can log into the tool, change the network and security settings and change the static IP address of the configuration tool to an IP on your subnet (e.g. 192.168.x.2) so you can manage it from any computer on your network. Don't forget to change your IP And DNS back on your computer back to automatic detection after you are done configuring your device.
On the downside, if you are using the WLI-TX4-G54HP in 125 High Speed Mode mode (aka g+ SuperSpeed, Gplus, HSM, SpeedBooster, Turbo G, Xpress, WME), which is only possible when used on a network with all 125 High Speed compatible devices, it freezes up and requires a power cycle when used under intensive bandwidth conditions, which I discovered when trying to transfer video between two TiVos connected to two WLI-TX4-G54HP converters and a Buffalo WHR-HP-G54 router (all of which support 125 High Speed Mode). This can be avoided by disabling the 125 High Speed frame bursting mode on your router. You will not experience this problem on a non 125 High Speed network (or even if you have a 125 High Speed Network with any non-125 High Speed devices on it since every device must support it to enable it).
Finally, if you have WDS-compatible router, such as any Buffalo router, you are better off using another WHR-HP-G54 router as a bridge since it provides the same functionality as the WLI-TX4-G54HP but also acts as a repeater to extend your network signal, and costs about the same price online. In fact, the WHR-HP-G54 looks identical to the WLI-TX4-G54HP, except that the latter lacks a WAN port and a switch to change from router to bridge mode. The only downside to using the WHR-HP-G54 as a bridge, is that doing so requires disabling 125 High Speed Mode on your router, but since this doesn't work well anyways, it isn't really a disadvantage.

Click Here to see more reviews about: Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buy Now

Click here for more information about Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Read More...

4/04/2012

NETGEAR XE102 Wall-Plugged Ethernet Bridge Review

NETGEAR XE102 Wall-Plugged Ethernet Bridge
Average Reviews:

(More customer reviews)
I tested these between the two units in a duplex apartment building. Each apartment has its own electrical meter and main panel, although they share the same 240Volt service from the street. Result: Works great! The speeds varied slightly depending on the outlets into which these were plugged, but were always much faster than my 3 Mb/s cable modem connection, and were also consistently faster than 802.11b wireless. Supposedly, the connection quality is not limited by distance, and the signal travels just fine across circuit breakers, fuses, and even between the two 120V legs of a 240V service connection, as I confirmed. In a big building, or one with many obstructions, wireless is a hit-or-miss solution, whereas this seems to be rock-solid.

Click Here to see more reviews about: NETGEAR XE102 Wall-Plugged Ethernet Bridge

The NETGEAR XE102 Wall-Plugged Ethernet Bridge lets you easily extend a network using just the existing electric lines of your home, eliminating the need to run unsightly Ethernet wires all over your house or apartment.
True Plug and Play Installation To extend a network using the electric lines in your home, you need two XE102 units. Simply plug one of them into a wall outlet and connect it to your router with an Ethernet cord. Plug the second one into any wall outlet that is electrically connected to the first and you have an instant Ethernet port to plug a computer, gaming console, or other networkable device with an RJ-45 Ethernet plug. You can create as many network connections as you need by connecting more XE102 units. The device has easy-to-read icon LEDs for status information at a glance.
The XE102 has a 10BASE-T Ethernet jack and supports the 10 Mbps HomePlug 1.0 standard. It uses Forward Error Correction (FEC) and Automatic channel adaptation to ensure the integrity of the data. In order to enable encryption, you need a computer with Windows XP, 2000, ME or 98.
The NETGEAR XE102 Wall-Plugged Ethernet Bridge is backed by a 3-year warranty.
What's in the Box XE102 Wall-Plugged Ethernet Bridge, installation guide, Ethernet cable, resource CD, and warranty/support information card.

Buy Now

Click here for more information about NETGEAR XE102 Wall-Plugged Ethernet Bridge

Read More...

3/17/2012

Cat5e Ethernet Patch Cable 350MHz 100ft Yellow Review

Cat5e Ethernet Patch Cable 350MHz 100ft Yellow
Average Reviews:

(More customer reviews)
definitely worth the price! i recommend measuring out exactly what you need, though. i ended up with extra feet of cable and it gets tangled but the product works great!!!

Click Here to see more reviews about: Cat5e Ethernet Patch Cable 350MHz 100ft Yellow



Buy Now

Click here for more information about Cat5e Ethernet Patch Cable 350MHz 100ft Yellow

Read More...