Showing posts with label xbox 360. Show all posts
Showing posts with label xbox 360. Show all posts

10/04/2012

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP ) Review

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )
Average Reviews:

(More customer reviews)
The WLI-TX4-G54HP is not perfect, but it is one of the best bridges out there. Unlike most bridges from Netgear, Linksys, and D-Link, the Buffalo Technology WLI-TX4-G54HP has 4 Ethernet ports built in, eliminating the need for a separate switch. This is key, since the advantage of a bridge versus wireless adapters is that one bridge can be used for multiple devices (e.g. in an entertainment center to support a TiVo, Wii, Xbox, Xbox 360, PS3, Slingbox, etc). The costly and time consuming alternative is to buy and configure a separate wireless adapter per device, one of which costs as much as the WLI-TX4-G54HP, and many of which don't even support the latest network security encryption.
Compared to other network equipment, setup was relatively straightforward. If you have a Buffalo router or access point, you can use one touch AOSS setup, which worked seamlessly, defaulting to the highest level of encryption supported by all devices (e.g. WPA-AES/CCMP). However, your AOSS settings on your Buffalo router default to supporting 125 High Speed if supported by all devices on your network which can cause issues on the WLI-TX4-G54HP (see below). Also, using AOSS to configure the converter disables any custom settings on your router such as disabling SSID broadcast (a highly recommended security practice), so you'll probably opt to configure your converter manually.
With Manual configuration you have the option of using the PC configuration software or the built-in web-based configuration tool. The only hitch with using the web-based configuration tool is that you have set your computer's wired Ethernet adapter IP address manually to 1.1.1.2 since the converter's IP address defaults to 1.1.1.1 and you have to be on the same subnet to connect to it since there is no built-in DHCP server (to do this, Right-click Network Places, click Properties, right-click your Local Area Connection, click Properties, click TCP/IP, click Properties, select Use the following IP address, and enter IP address 1.1.1.2 and subnet mask 255.255.255.0). Once you change your computer's IP, you can log into the tool, change the network and security settings and change the static IP address of the configuration tool to an IP on your subnet (e.g. 192.168.x.2) so you can manage it from any computer on your network. Don't forget to change your IP And DNS back on your computer back to automatic detection after you are done configuring your device.
On the downside, if you are using the WLI-TX4-G54HP in 125 High Speed Mode mode (aka g+ SuperSpeed, Gplus, HSM, SpeedBooster, Turbo G, Xpress, WME), which is only possible when used on a network with all 125 High Speed compatible devices, it freezes up and requires a power cycle when used under intensive bandwidth conditions, which I discovered when trying to transfer video between two TiVos connected to two WLI-TX4-G54HP converters and a Buffalo WHR-HP-G54 router (all of which support 125 High Speed Mode). This can be avoided by disabling the 125 High Speed frame bursting mode on your router. You will not experience this problem on a non 125 High Speed network (or even if you have a 125 High Speed Network with any non-125 High Speed devices on it since every device must support it to enable it).
Finally, if you have WDS-compatible router, such as any Buffalo router, you are better off using another WHR-HP-G54 router as a bridge since it provides the same functionality as the WLI-TX4-G54HP but also acts as a repeater to extend your network signal, and costs about the same price online. In fact, the WHR-HP-G54 looks identical to the WLI-TX4-G54HP, except that the latter lacks a WAN port and a switch to change from router to bridge mode. The only downside to using the WHR-HP-G54 as a bridge, is that doing so requires disabling 125 High Speed Mode on your router, but since this doesn't work well anyways, it isn't really a disadvantage.

Click Here to see more reviews about: Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buy Now

Click here for more information about Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Read More...

8/11/2012

Cables To Go 21471 Cat5E 350 MHz Snagless Patch Cable, Blue (100 Feet/30.48 Meters) Review

Cables To Go 21471 Cat5E 350 MHz Snagless Patch Cable, Blue (100 Feet/30.48 Meters)
Average Reviews:

(More customer reviews)
This 50' cable was a great price and worked well for my purpose of connecting from hub to blu-ray player (running it through the attic). The snagless protectors work well, particularly when fishing through holes.

Click Here to see more reviews about: Cables To Go 21471 Cat5E 350 MHz Snagless Patch Cable, Blue (100 Feet/30.48 Meters)



Buy NowGet 43% OFF

Click here for more information about Cables To Go 21471 Cat5E 350 MHz Snagless Patch Cable, Blue (100 Feet/30.48 Meters)

Read More...

6/21/2012

Cisco-Linksys WGA11B Wireless-B Game Adapter Review

Cisco-Linksys WGA11B Wireless-B Game Adapter
Average Reviews:

(More customer reviews)
Okay, first of all I'm hot on linksys (see my other reviews). I used to do network stuff for a living - don't anymore, but I have always been impressed with Linksys (compared to Netgear, DLink and Microsoft) for the consumer market. Their stuff is by and large (prosumer) - it has some good pro features without having to be a rocket scientist to configure the thing. Now that Cisco owns them - it's even a better deal as Cisco has been putting some nice features into all of linksys's products. While the tech support guys at linksys all need an attitude adjustment (they are a surley bunch) - the products often don't require tech support... so I suppose it is a good-news, bad-news, kind of thing...
But this sucker was PLUG AND PLAY for all intensive purposes. There are a few things, however, I think people should know in order to set this up:
a) You probably want to turn off all WEP and MAC filters. You can turn them back on once you get the sucker id'ed on the network and talking... but for now, leave it off.
b) You probably want to turn ON your SSID (again, makes it easier for the thing to install out of the box.)
c) You probably want to know what your broadcast frequency is on your WAP. If you are using a linksys WAP it is found on the admin screen regarding security. You need to look for the broadcast ID channel (default is six). That is the channel you want to tune the WGA11B. However, what I really recommend that people do is avoid "ad hoc" mode entirely and set the WGA to In mode (looks kind of like 1n on the WGA display) - this is infrastructure mode. Infrastructure mode is what you want to use if you are using a broadcasting router/switch/bridge access point (like the linksys Wireless-B, G, WAP11, etc.)
d) Make sure you know what type of cable you are using to connect it. The cable that comes with the broadcast bridge unit (the WGA) is actually a CROSSOVER cable. This was a bit surprising to me (not that they are hard to make, just, you rarely ever get one from someone - you always wind up making them). You'll know you have the switch in the right position when the WAN light (the little symbol that looks like a circle with two lines in it) lights up GREEN.
e) If you are not already, I'd set up DHCP for the moment. The bridge is default configured to try and connect via DHCP. If you don't have DHCP configured, I don't know what it is going to try to do default IP static (probably 192.176.1.1 if it is like other linksys products). Save yourself the headache and do DHCP.
Okay - otherwise, this sucker is easy as pie to set up. Plug it in to your LAN adapter (I have PS2 so it is a little box on the back of the game thing - don't know about Xbox). Then plug the cord into the WGA. Turn the WGA on and set it to the channel of your WAP. It should start talking IMMEDIATELY. If not - you have done something wrong.
The CD for the PC is interesting. Like most linksys products - it looks nice and is full featured. You won't need the CD for configuring the WGA unless you plan on using WEP.
The infrastucture mode is really fast. I must say that I play online alot.... and this connection point on PS2 shows virtually no lag. I don't know what Sony did via their gaming networks - but this sucker runs QUICK. Like I said, virtually no lag.
The real bummer is that about 99% of the games out there are not multiplayer yet. The ones that are, however, are really fun to play. I play MOH:RS, Desert II, and a few others online. The games are quick paced. To really take advantage of it, however, you might want to go "full bore" and invest in a USB headphone/mic set so you can "talk to people". Also, the USB keyboard might be a nice feature too... although I don't have that...
I've seen quite a few game adapters out there (do a search on Amazon - you will see). This is the best one I've seen for the money.
One last thing - I'd forget "Wireless G" adapaters. Again, unless your connection is like a T3 line straight to the house (which 99% of most people do not have) - you're only as fast as your smallest connection - which is likely to be the ADSL/Cable router connection. Comcast is 3MB - which I NEVER get (even burst inside Comcast's net). So B is MORE than enough bandwidth. I heard some guy at Best Buy trying to talk up a Wireless-G adapter saying he would get "better performance" - and while that is true.. it's like putting brand new wheels on a car with an underpowered engine... yeah, it will look better... but it won't go faster.
See you out there...

Click Here to see more reviews about: Cisco-Linksys WGA11B Wireless-B Game Adapter

The LINKSYS WGA11B Wireless-B Game Adapter gives any wired Ethernet equipped game console wireless connection capability. If you have an existing home wireless network with a cable or DSL Internet connection, the Game Adapter lets your PlayStation, XBOX, or GameCube attach to the network so you can get into online games without running wires to the game room. Or, you can use a pair of Game Adapters to form a "cable-less cable" between two game consoles for head-to-head gaming -- in the same room, or all the way across the house!

Buy Now

Click here for more information about Cisco-Linksys WGA11B Wireless-B Game Adapter

Read More...

3/10/2012

ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch Review

ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch
Average Reviews:

(More customer reviews)
It's true that HomePlug AV nodes cannot intercommunicate with HomePlug 1.0 nodes. ZyXEL and most, if not all, other HomePlug AV hardware manufacturers are derelict in not pointing out that fact. As an engineer who works with HomePlug almost full-time, I know that AV kicks 1.0's tail in terms of bitrate versus SNR. That doesn't excuse ZyXEL's dereliction, but it gives you cause to ponder retiring your HomePlug 1.0 hardware and replacing it with HomePlug AV hardware. Even if you think you won't benefit sufficiently from HomePlug AV's nominal 14x bitrate improvement, you might need AV's ability to reach more electrical outlets in your building with a bitrate that is usable for your application.
There's another compatibility matter to be aware of. When I examined a new PLA-470 the other day, I was disappointed, but not surprised, to find that the version of firmware installed in the HomePlug AV chipset is an old, pre-standard version, 1.4.5, that is not truly HomePlug-AV compliant and, more importantly, that cannot intercommunicate with subsequent firmware versions. I have not checked to see whether ZyXEL provides the means to upgrade the firmware of the HomePlug-AV chipset. The newest version is 3.0.5. For more detail on the topic of HomePlug-AV-chipset firmware, see my review of the Linksys PLE200.

Click Here to see more reviews about: ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch



Buy Now

Click here for more information about ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch

Read More...

1/20/2012

NETGEAR FS605NA 5-Port Fast Ethernet Switch Review

NETGEAR FS605NA 5-Port Fast Ethernet Switch
Average Reviews:

(More customer reviews)
This switch is as advertised. It works out of the box, without any problems, setups, uplink switches, or anything else. Just plug and play.
Silent, fan-less operation. However, it does get a bit warm to the touch. If fully loaded (using all ports at high volumes of traffic) and running in warmer room, overheating may become an issue. Even so, I'll take that possibility over yet another noisy fan in my office.

Click Here to see more reviews about: NETGEAR FS605NA 5-Port Fast Ethernet Switch

The Netgear FS605 is a powerful plug-and-play switch that connects at 10 or 100 Mbps and makes it easy to link as many as five computers or peripherals to your Ethernet network. You'll experience maximum performance for 10/100 Mbps devices with five ports that automatically sense the correct speed, and Netgear's Auto Uplink feature adjusts for different types of Ethernet cables. The FS605's sleek case has lights on the front for easy monitoring. Installation into your home network couldn't be simpler and, once connected and turned on, it begins cool and silent operation--without an internal fan.

Buy NowGet 42% OFF

Click here for more information about NETGEAR FS605NA 5-Port Fast Ethernet Switch

Read More...

12/19/2011

CAT6 Xbox 360 Elite 15M (50FT) Network Cable (For Xbox LIVE) Review

CAT6 Xbox 360 Elite 15M (50FT) Network Cable (For Xbox LIVE)
Average Reviews:

(More customer reviews)
This cord is a double ethernet cable stretching a long fifty feet. I use this cord to connect my Xbox 360 console to my modem in another room. It has a very fast green bar connection on all the games I play online. When using a device on the same network it tends to only slow down a bit and is usually still playable. I would recommend this as a cheap alternative to buying a Wireless Adapter. It works superbly and gets the job done.

Click Here to see more reviews about: CAT6 Xbox 360 Elite 15M (50FT) Network Cable (For Xbox LIVE)



Buy Now

Click here for more information about CAT6 Xbox 360 Elite 15M (50FT) Network Cable (For Xbox LIVE)

Read More...

10/15/2011

Cisco-Linksys E2100L Advanced Wireless-N Router Review

Cisco-Linksys E2100L Advanced Wireless-N Router
Average Reviews:

(More customer reviews)
I'm on my second router after the first one was replaced through RMA. Router seems to work fine for about a week and then I have problems writing to my attached USB drive. Reads work OK but are incredibly slow. Then the router requires a reboot and the problems go away for about a week.

Click Here to see more reviews about: Cisco-Linksys E2100L Advanced Wireless-N Router

Cisco E2100L Wireless Router - 300 Mbps E2100L 176

Buy Now

Click here for more information about Cisco-Linksys E2100L Advanced Wireless-N Router

Read More...

10/10/2011

D-Link DGL-4500 Xtreme N Selectable Dual Band Draft 802.11n Gaming Router Review

D-Link DGL-4500 Xtreme N Selectable Dual Band Draft 802.11n Gaming Router
Average Reviews:

(More customer reviews)
The following will likely save you a couple of hours of research...
The DIR-655 is single-band (2.4GHz).
The DGL-4500 is dual-band (2.4GHz and 5GHz), however it only uses one band at a time. You choose which band, manually, in the configuration. It doesn't choose the best band in real-time, or anything like that.
The DIR-855 is dual-band (2.4GHz and 5GHz) and uses both bands at the same time.

Click Here to see more reviews about: D-Link DGL-4500 Xtreme N Selectable Dual Band Draft 802.11n Gaming Router

It's not everyday you come across a device designed solely with the gamer in mind. The D-Link Xtreme N Gaming Router (DGL-4500) is one of those few devices built especially for gamers. Experience the power of our Xtreme N Duo wireless technology for data transfer rates of up to 300Mbps* and Gigabit LAN and WAN Ports to get your game on faster than ever before. We've also added an updated version of our award-winning GameFuel technology to get your game going smoother. To top it off, we've thrown in a high-performance CPU and a Network Activity Display to give you a serious gaming router.

Buy NowGet 52% OFF

Click here for more information about D-Link DGL-4500 Xtreme N Selectable Dual Band Draft 802.11n Gaming Router

Read More...

9/03/2011

Cables To Go 28726 High-speed Internet Modem Cable (100 Feet ) Review

Cables To Go 28726 High-speed Internet Modem Cable (100 Feet )
Average Reviews:

(More customer reviews)
Erases most or all background static, and increases sound clarity. Even improves quality of receiving cell phone transmission connectivity. (Phone Line)
Throughput and speed will increase as a result in noise reduction. More noticeably the throughput rather than the speed. See your internet connection speed at speedtest.net.
(DSL Internet)
Overall product quality and reliability excellent and would highly recommend for customers looking for long RJ11 cable in these two areas. (Phone/Internet)


Click Here to see more reviews about: Cables To Go 28726 High-speed Internet Modem Cable (100 Feet )



Buy NowGet 29% OFF

Click here for more information about Cables To Go 28726 High-speed Internet Modem Cable (100 Feet )

Read More...